Images are representations only.
Model KPS35 Chain Hoist Testing Set
Brand: Tecsis
The KPS35 is used to test the friction clutch on chain hoists.
The device consists of a force transducer with chain adapters and a display unit.
To perform the test, the force transducer is inserted into the chain, travels upwards with it against the base of the chain hoist and thereby blocks the chain.
The display unit allows you to read off the magnitude of the force at which the friction clutch operates.
Simple and convenient operation is possible using the built-in handle.
The force transducer is built as shear force transducer and is therefore unaffected by parasitic forces and torques.
It has a large measuring range from 40 to 3,500 kg with a deviation from <1 kg.
The output signal is carried via cable to the handheld indicator.
Features- Rugged design
- Easy handling
- Simple calibration of friction clutches without weights
- Low weight
- Single sensor concept for entire load range
- Maximum/minimum value memory
- Easy to read illuminated graphical display
- High accuracy (measurement uncertainty <1 kg)
Specifications
Brand
Accuracy
- < 1 kg
Approvals & Certifications
- ISO 9001: 2015 Certified
Display
- Hand-held Indicator: LCD Display, 5-Digits, Illuminated
Environmental Protection
- Protection Class: Force Transducer IP67
- Protection Class: Hand-Held Indicator IP40
Function
- Average
- Hold Function
- Maximum
Measuring Range
- 40 to 3,500 kg
Operating Time
- 8 Hours (Per Rechargeable Battery)
Size
- Nominal Size DN: 3 to 22 mm
Temperature Range
- Temperature Application Area: -20° to 60° C (-4° to 140° F)
- Services & Maintenance
- For Friction Clutch Testing on Chain Hoists
